UPVC Replacement Door Handles
The handles on your doors get worn out over time and will need to be replaced. In this case, it is crucial that the new handles are in line with the dimensions of the old handle.
The three measurements to be inspected are the top screw's location the lever and key hole dimensions. Use the size guide to assist you.
Inline Lever/Lever
A lever/lever handle is a modern door handle that is designed to fit new or replacement doors. This kind of handle is available in various styles and finishes. A variety of manufacturers provide this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made from durable materials, and are perfect for multi-point lock doors that require a robust design. The handles are inline and run off the same spindle and screw fixings. They can be easily incorporated into existing or new uPVC/Composite doors.
The spring lever design allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been tested to 200,000 cycles, this allows for the assurance of the quality of the finish as well as the performance of the handle over time. The sprung lever can also be reduced to accommodate a wider range of locks. This is particularly useful for narrower doors where the cylinder is further away from the door. A shortened lever is also an ideal choice for doors that have latches that can be activated by the thumb turn located on the inside.
Lever Pad
The lever pad upvc handle is distinct from the lever handles found on most doors. These handles are operated by one spindle or two spindles, either inline or offset. They are usually used on UPVC doors with double glazing and come in a variety of finishes & variations.
The handles are available in various finishes, including White chrome, and Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This gives the handle an outstanding performance and long-lasting durability for its intended use.
All of the UPVC lever pad styles for handles are supplied with a spindle and screws which allow them to be installed on a new or existing uPVC door. The backplate fixing centers of 211mm allow for a larger size handle that can often be a benefit in replacing a defective or worn multi-point door lock mechanism. These levers for handles are also spring-loaded, thereby solving the issue of door handles sagging out of their horizontal position when not in use.
It is essential to ensure that the dimensions of the PZ for both the multipoint lock as well as the uPVC doors when choosing a replacement UPVC spindle and handle. This measurement can also be called 'handle centres or cylinder centre'. It is important to match the right handles.
When you have the right PZ size you will then have to ensure that the handle lever pads and push pads are in a suitable shape for the American with Disabilities Act (ADA) approved handles you require for your doors. They typically have of a round or square shape, with an internal lever as well as an external push pad.
The majority of UPVC Lever Pads we sell are spring-loaded. This means that they return to a horizontal position when not being used, rather than hanging and possibly securing to the frame. This prevents drafts and cold air from entering a property. The majority of UPVC lever pad style handles come in both left and right handed models, allowing them to be placed on either side of doors.
Euro Cylinder
Cylinder locks are usually used on uPVC doors, but can also be found on other types of door. Cylinder locks are operated with a key that unlocks the cylinder's casing. This reveals pins that can be aligned to those inside the lock and allow them to rotate the revolving camera, thereby opening the door. Euro cylinders can be fitted with up to six pins with both internal and external doors usually needing different levels of security.
The choice of cylinder is crucial. It's dependent on the amount of use your doors and handles receive. For instance, doors that are external should be fitted with a more secure cylinder while doors inside can be secured with the standard cylinder. Certain cylinders are equipped with additional features that increase security, like anti-drill or anti-bump properties.
A euro cylinder must be measured correctly to ensure it is the correct size for your door. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, should there be one. It is best to do this with the lock in place however, if this is not possible, you can remove it to take measurements. It is essential to ensure that there is no cylinder that extends beyond the handle or escutcheon. This can make it vulnerable to snapping lock attacks.
Most modern cylinders are made with bump and anti-drill features included in their design. upvc replacement door handles are designed to reduce attack chances by forcing the cylinders to turn in a different direction. This can to deflect attacks and keep your door safe.
There are also cylinders that have been constructed to withstand snapping. This is a more frequent type of attack on cylinders, where the break line inside the lock is targeted using a special tool to break the front of the cylinder and allow the door to open. This is a lot faster and less difficult than opening the door with multipoint locks and leaves little evidence of a burglary, which could hinder the insurance claim.
Spring Cassette
The spring cassette is located within the base of your door handle's backplate, supplying a spring-loaded solution and returning the multipoint lock handles back to their rest position after use. Previously a lot of handles didn't have a spring built into them and without this they are more likely to slide or drop once the locking mechanism is removed. Adding this simple component is one of the best ways to correct this, and is an excellent way to stop your doors made of upvc from becoming stuck in the open or closed position, as they aren't always easy to manually close by hand.
These spring cassettes were created to be used with a sprung multipoint locks. They won't work with handles that are not sprung and you'll need to cut a hole in your backplate in order for them to fit. (Please look at the image for a detailed diagram). These cassettes can be used as a replacement for damaged or missing cassettes that are in the backplate of uPVC door handles. They are fitted with a square cut out which accommodates an 8mm spindle and are available in a variety of.
These spring cassettes offer an excellent value solution for the issue of door handles that are sagging. They are simple to install and will increase the lifespan of your uPVC doors. For more information on our range of uPVC accessories and spares, please feel free to get in touch with our team. We are always available to offer professional advice and assistance you.